Mayur Dynamic Tiles & Pavers

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Top Layer Quality:-(Our Top Layer of Pavers is around 10-12mm Thick. The thick top layer concrete is of very high ratio, providing our pavers greater resistance to abrasion.)
Strength & Durability:-(The minimum Strength on which we are working and suppling is M-30, Providing higher life and durability of our pavers.)
Packed Material :- (State of the art material handling system with pallets, forklifts & crane mounted truck from Austria. Packed Material reduces the handing breakages upto great extent.)
Latest Technology :- (Fully automatic machines from US & Italy to manufacture Pavers & tiles in large quantities )
Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.

Features:

• Highly versatile in fitting
• Color combination can be
• customised
• Recommended for Pavement of
• Residential and Commercial
• complex, Roads, Industrial
• Compounds, Parkings, Driveways,
• Pathways etc.

Kerb stones are very stylish strong and perfect replacements for bricks. Theyoffer an elegant look to your home, office or any other building and maintain it
in robust condition for years. Kerb Stone comes varied shapes and sizes. These stones have multiple utilities like drainage channels on highways, delineate
paved areas, used at driveways, streets, and hardstandings.

Features:

• A good quality of concrete should not age.
• After years also if kepy raw without any
• maintenance our product will not degrade.
• If maintained properly our kerb will give decades of
• life.
• High Strength as per requirement can be achieved.
• Processed with High Vibration & compaction with
• controlled weight of raw material and fixed cement
• ratio to get the best density and quality.
• No sign of deterioration on front face.
• Low strength, less dense, high breakages & high water
• absorption can be easily seen.
• Poor quality of concrete is used, even waster of RMC,
• stones, broken pavers etc are put inside to cut cost
• but which ultimately gives no consistency to product.
• After few years you will see deterioration of concrete
• easily which is non-repairable.
• Processed with just compaction, that too with poor
• Cement ratio.
• Replacement of product will be needed after some time.